750w High Voltage Switch Model Laser Power For Yueming Lasers Where To Buy Laser Power In China

750w high voltage switch model laser power for Yueming lasers
Model: HY-C150-Y3 for RECI ,EFR,Yongli,Weegaint 130watt,150watt laser tubes on yueming laser cutting and engraving machines
Matche with 100W 120W 130W 150W CMA Han's YUEMING co2 laser machine
1.HY-C150-Y3 withDB9pin,itiscontrolledby0~3.3vanalogsignalsorPWMcontrolsignal,
Specialdesignedfor60W,80WCMAlasercuttingmachinemanufacturedbyYuemingfactories.
2.HighVoltagePowerSupply:InputAC220VorAC110VVoltage,MaxoutputDC 50KV.
4.ThisPowerSupplyhasthe”TEST”buttonwhichcantestoutputlasermanually.
5.TheLaserPowerSupplyhashighOutputPower,goodstability,thiscanprolonglasertube'sservicelife.
6.EasyControl:ThestartandstopoflasercanbeeasilycontrolledbyTTLlevel.either0~3.3vanalogsignalsorPWMcontrolsignalcancontrolthelaserpower.
7.TheLaserPowerSupplyhasoutputopencircuitprotection.
8.ThisLaserpowersupplyhasTTLsignalindication,waterthroughsignalindicationandlaseroutputindication.
9.Thepowerhasfeedbackinterface,canbeusedforclosed-loopcontrol,alsocanbeusedfortestingthelasertubeworkingcurrent.
10.Application:HY-C150-Y3 LaserPowerSupplyisusedfor 130W,150W,CMAYuemingLaser
CuttingandEngravingAcrylic,Fabric,DoubleColorSheetandRubber,etc.
YUEMING laser cutting machine power source Specification

Input
Input Voltage
AC110V or AC220V ( to be specified when placing the order)

AC frequency
47—440HZ
Max input power
750w
Max output current

10A

Output
MaxOutput Voltage
DC 50KV
Max Output Current
DC 38mA
Efficiency
≥90 percent(full load)
MeanTime Between Failure (MTBF)
≥10000 hour

Response Speed
≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Withstand Voltage
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment
Operating Temperature:-10~40°C),Relative Humidity (RH)≤90 percent
Cooling Way
Force-Air Cooling (FAC)
Dimension
LxWxH=325*240*97 (mm)
Color
Black
1. HY-C150-Y3 and Laser Tube Connection diagram
High voltage terminal (HV+) of HY-C150-Y3 power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.
2. Connection of HY-C150-Y3power supply and control board
Connection of control signal(See the wiring diagram of power supply and control interface card))
The control signal shall be reliably connected to control terminal of the power supply HY-C150-Y3 ,And ensure the control boardground, laser power supplycase, the shell of a laser machine and computer chassis and reliable together.If the laser lamp can not work properly, should check the control signal is correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤3.3V,Check and make sure protection switch WP connection is correct at same time.
HY-C150-Y3 power supply Manual Test Method
Firstly make sure HY-C150-Y3 power supply and laser tube correct well, disconnectthe control terminaland press the button" TEST" on HY-C150-Y3 power supply for 5-10seconds to check if there is laser output fromlaser tube.This method is easily tojudge if power supply is ok.
Shandong Laser Source Technology Co.,ltd. is the same asJinanHongyuanElectricCo.,Ltd
isahigh-techenterprise,locatedinthecoreareaofelectronicallydevelopedregions-Jinan. Professionaldesigner &manufacturer&exporteroflaserpowersupply with17 years experience,Have good long - term cooperation with YUEMING laser, HAN'S laser, GCC laser, RECI laser, EFR laser, Boye laser, Beyond laser, Senfeng laser, Bodor laser,SUN-UP laser,etc.Hope we will have chance to help you in your business line.
Our company can customize laser power supply according to your requirment. Actually, about
50%of our laser power are specially customized for laser machine factory.After - sales service

(1) Warranty: one year
(2) Free charge of the maintenanceback to our factory (Besides shipment charge)
(3) Free charge of accessoriessending to your door (If broken by non-artificial factors within warranty)
(4) 24 hours online supporting technical service
We produce strictly according to ISO9001:2008 international quality management system elements
of conduct production activities. All series co2 laser power supply got CE Certification.
Shandong Laser Source Technology Co.,LTD
Jinan Hongyuan Electric Co.,LTd
TEL:0086-531 88190005Fax:0086-53188190006
Web:www.jnhyec.com/en/www.laserpower.cc
Add: No.15LanxiangRoad,Jinan250032,Shandong,China
ID: jannyin(at)icloud.com
E-mail: @
Wechat: yinruizhen826
WhatsApp: 0086-15169183960