Hy-t50 High Voltage Laser Transformer High Voltage Laser Transformer For Laser Cutting Machine 50w 5

Co2 High Voltage LaserCutting MachinePower Supply HY-T50
Model: HY-T50 power supply for 35W,40W,50W co2 laser tubes on laser engraving and cutting machineProduct Description
1.50watt co2 laser power supply Main Features
1.Good Compatitility: HY-T50power supplycan be applicable to 40w, 50w laser tubes manufactured by different factories.
2.50w laser power sourcehas good power stability and strong adaptability, It can prolong the laser tube service life dramaticlly.
3, Easy control: the start and stop of laser can be easily controlled bt TTL level.
4,HY-T50 high voltage laser power boxhas output open circuit protection.
5,HY-T50 high voltage power supplyhas TTL signal indication, water through signal indication and laser output indication.
6, T50 50wLaser tube power supplyhas the BUTTON to test output laser manually.
7, T50application: T50 is used for 40w,50w laser engraver ,sculpture and cut acrylic, fabric, double color sheet and rubber, etc.
II. HY-T50 laser power supply Specification
Input
Input Voltage
AC220V or AC110V(to be specified when placing order)
AC frequency
47—440HZ
Cold Surge Current
≤60A(AC220V Input)
≤30A(AC110 Input)
Current Leakage
≤0.7mA(AC220V Input)
≤0.4mA(AC110V Input)
Output
Max Output Voltage
DC 25KV
Max Output Current
DC 20mA
Efficiency
≥90 percent (full load)
MTBF
≥10000H
Response Speed
≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage
Input-Output, Input-Shell AC1500V 10mA 60S; Output negative is connected with machine shell.
Protection
can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment
Operating Temperature-10~40°C),Relative Humidity (RH)≤90 percent
Cooling Way
Force-Air Cooling (FAC)
Dimension
LxWxH=167*144*97(mm)
III.Operation Instruction:
1.Laser Tube connection:HY-T50 laser power supply high voltage terminal (HV+) should be connected to the positive pole of CO2 laser tube. Current circuit of HY-T50laserpower supply shall be connected to negative pole (laser output terminal) of laser tubebyan ampere meter or directly.
2.Connection of control signal
The laser machine control signal connect to HY-T50laserpower supply control terminal ,after connecting the DAC output signal and TTL signal of external computer with HY-T50power supply, the laser tubeshall work as expected. If the laser lamp can not work properly, check the control signal is correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and make sure protection switch WP connection is correctat same time.
3.Voltage of power input:
HY-T50's power input of the power supply shall be 220VAC/50Hz. If 110VAC required ,please specify when placing order.
4.Others:
A group of protection switches are also reserved for detection of water switch, fan switch, open-enclosure protection and so on.
Caution:3. Attentions should be given to avoid any electric shock after the power supply being switched off.( The Insulation safety requirements should be 40KV between the terminal of output and "G")1. 50w glass tube and power supplyHY-T50Connection diagram
2.Connection of power supply HY-T50 and control board
HY-T50 power supply Manual Test Method
Firstly make sure HY-T50 power supply and laser tube correct well, disconnectthe control terminaland press the button" TEST" on HY-T50 power supply for 5-10seconds to check if there is laser output fromlaser tube.This method is easily tojudge if power supply is ok.
V. HY-T50co2 laser power supply Pictures;Packaging & Shipping
HY-T50 Power Supplycarton size: 28*22*16cm,4pcs/carton
Shipping by SEA, AIR, EXPRESS for your choiceCompany Information
Shandong Laser Source Technology Co.,ltd.
JinanHongyuanElectricCo.,Ltd
Our factoryisahigh-techenterprise,locatedinthecoreareaofelectronicallydevelopedregions-Jinan. Professionaldesigner &manufacturer&exporteroflaserpowersupply with17 years experience,Have good long - term cooperation with YUEMING laser, HAN'S laser, GCC laser, RECI laser, EFR laser, Boye laser, Beyond laser, Senfeng laser, Bodor laser,SUN-UP laser,etc.Hope we will have chance to help you in your business line.
Our companycan customized laser power supply according your requirment. Actually, about
50%of our laser power are specially customized for laser machine factory. If you have any
urgent needs, please contact us freely.Our ServicesAfter - sales service
(1) Warranty: one year
(2) Free charge of the maintenanceback to our factory (Besides shipment charge)
(3) Free charge of accessoriessending to your door (If broken by non-artificial factors within warranty)
(4) 24 hours online supporting technical service
We produce strictly according to ISO9001:2000 international quality management system.
Below are our products cerficates for reference:
Welcome to our factory!!!
Shandong Laser Source Technology Co.,LTD
Jinan Hongyuan Electric Co.,LTd
TEL:0086-531 88190005Fax:0086-53188190006
Web:www.jnhyec.com/en/www.laserpower.cc
Add: No.15LanxiangRoad,Jinan250032,Shandong,China
ID:laserpwr
E-mail:@
Wechat: HY-PSU
WhatsApp: 0086-15054165515