10Nm3/hr 99.999% PSA nitrogen generator system for laser cutting line
KL PSA nitrogen generator purity:93%,95%,97%,99%~99.999% high purity nitrogen plant.
Model description:
KP is our gas generator production line.
N : Nitrogen gas
O: Oxygen gas
KPN29-10 10Nm3/hr, 99% pure. (two 9)
KPN39-10 is 10NM3/hr 99.9% pure
KPN49-10 is 10Nm3/hr, but 99.99% pure
same flow rate but different pure requirement.
Pure less than 99%, will direct show the pure on the model, like this:
KPN97-10, 10Nm3/hr 97% pure
Main specification of KL 10Nm3/hr 99.999% PSA nitrogen generator:
Item
Technical
Remark
N2 flow rate
10Nm3/h Standard state
N2 purity
≥99.999% non-oxygen content
N2 outlet pressure
0.4~0.6Mpa Gage pressure, adjustable
N2 outlet dew point≤ 45°C Atmospheric dew point
Environment condition of KL PSA nitrogen generator
1.installation place: ground grading, without foundation, but it is necessary to have a sewage discharge ditch.
2.The reserved area: about 200m2.
3.Ambient temperature: ≤40°C.
4.Relative humidity: ≤80%.
5.Power:440V/ 380V/220V,60/Hz/ 50Hz
Nitrogen system
1 air compressor
2 Compressed air pretreatment system (dryer and multistage filters)
3 Air buffer tank
4 PSA nitrogen generator
5 Nitrogen gas buffer tank
6 Control system(including man-machine control interface)
7 Instrument and meter (installed in nitrogen generator)
We will test the whole equipment with compresser ,air dryer ,filter and generator in our plant,and adjust all the valve for you,when you get it,easy for your installation.
Related Products: