batte stailes steel hydraulic 60mm belt screen changer for Plastic Extruder

Products Description
Introduction of automatic belt screen changer:
Features of Automatic screen changer:
◆ Belt screen changer is consisted of screen changer body, heating/cooling system, electric control system, etc.
◆ The control system can control filtration time and speed automatically.
◆ This series screen changer is fully automatic and continuous.
◆ Excellent output stability, product has no deformation, quality stability.
◆ There is no waster or scrap during whole production, low material consumption.
◆ The filter length can be customized range from 10mm to 20mm, and can be used continuously for 2-6 months.
◆ It’s suitable for plastic polymer, such as PP, PE, ABS, PS, etc.

Applications of Continuous belt screen changer:
◆ Blown & cast film
◆ Sheet
◆ Compounding
◆ Pipe
◆ Tubing
◆ Profile
◆ Multi-layer extrusionCustomer Photos
What are the benifits of screen changer on extruder?1, improve the quality of the final products2,greatly improve the plasticizing of the raw material3, make the product structure more homogeneous and product surface smoothness4, protect the down stream equipments, such as Gmach melt pumps and the extrusion dies What are the benifits of melt pump on extruder?1, to improve the stability of the product size2,melting quality control3, increase output4, reduce the raw materil consumption5, improve the flexible of the extruder6, protect the extrusion die ,extend the service life of the extruder What are the benifits of installation the screen changer and melt gear pump together?1, improve the melt plasticaction2, improve the quality of the products3, extend the service life of the extruder4, greatly increase the output of the products5, reduce the labor interference6, reduce the unqualified products What do we need to pay attention when using the screen changer nad melt pump?1, we should operate the screen changer and melt gear pump as the safety manual, prevent an electrical shock2, To prevent ourself scald3, do not disassemble the screen changer and the melt gear pump, any questions, please contact with the supplier.Product Paramenters

Structure of automatic Continuous belt screen changer:
Type
Capacity (kg/h)
Dimension (mm)
Screen size
Heater
L1
L2
L3
Diameter (mm)
Area (cm2)
Voltage (v)
Power (w)
ZB-ACB-50
30-85
150
165
540
50
20
230/400
5200
ZB-ACB-70
75-200
160
170
560
70
38
230/400
5400
ZB-ACB-90
100-290
170
185
580
90
64
230/400
5800
ZB-ACB-100
130-350
180
215
605
100
78
230/400
6200
ZB-ACB-120
190-500
185
230
645
120
113
230/400
6500
ZB-ACB-150
350-800
200
265
700
150
176
230/400
7200
ZB-ACB-180
450-1200
220
305
760
180
254
230/400
8200
Notes: The capacity will be affected by the fluidity, filter fineness and purity of materials.Certifications
Company Profile
Batte is one of the most professional manufacturer of melt pump, loss-in-weight feeder, and screen changer. Batte has accumulated abundant experience on the application technique of these products. Recently according to the development trend of melt pumps, screen changers and loss in weight feeders application all over the world, especially in the field of precise plastic extrusion, we have done extensive research on the prpduct operation performance, practical function, equipment structure and control technology and achieved regular achievements.


BATTE screen changer can not only filter the impurities, but also can significantly improve the plasticizing and homogenization effect of the raw material. In this way, it can make the product structure more homogeneous and product surface more smooth, thus improve the quality of extruded products. In a word, BATTE screen changer can reduce the unit cost and increase hourly output.
Exhibition
shipping
Batte will choose the most reasonable packing material and packing dimensions for our product, all wooden case package is fumigated, and dimensions are designed to be economical to container shipment. For shipping, we usually work on FOB/CFR/CIF. We will supply related report and packing pictures of products before shipment to customers.FAQ
1. Which screen changer model we should use?Before recommending our proper screen changer model for you, we want to confirm with you the points as follows:1.1. Do you use the extruder during production? Is it single screw extruder or twin screw one?1.2. The materials you use, are they raw materials or recycled ones?1.3. The hourly output;
1.4. The final products;
1.5. Do you use screen changer before? If it is, please tell us the filtration fitness and screen diameter;
1.6. How often you need to change screen;
1.7. The max. Operating pressure;2. What is your MOQ?At present, our MOQ is 1 set;3. How long is the delivery time?In general, the delivery time is 4-5 weeks.4. What is your guarantee term?The warranty period for our products is one year.During the warranty period, the seller is responsible for replacing free damageable parts , while the buyer pays for freight. 5. How about the oversea installation and debugging?Our engineer can be assigned for installation and debugging. Or we can use long-distance technical assistance based on Industry 4.0