Mgo drywall board making machine line

Product Description
mgo board making machine line
The production line adopts the technology of double-drive double-roller extruding, the board is formed once
after sizing, material feeding, spreading no-woven cloth,
compounding and repressing. mgo board production
line runs stably with high automatic degree, the
specification of its product can be adjusted arbitrarily.

features


1.The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine. It is easy operation,low production cost, small investment

and fast effectiveness.

2. The automatic mgo board production line has high automatic degree, simple production technology, low labor intensity and production line is no noise and three wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4.It can produce according to different customers' request like size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max length 3660mm and width is 1250mm.Thickness from
3-25mm.

Technology features

There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure.This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don't need high temperature drying, air-drying and watering,and under the normal temperature, they will dry well indoor.

Advantages
Number
Item
Content
1
Low cost
Low labour and raw materials costs
2
Long life
Up to 30 years
3
Recycling use
Reused for more than 8 times
4
Environment protection
Environment-friendly raw materials used
5
Flexible layout
adjusted according to your requirement
Equipment components
This automatic mgo board production line in China is made up of two parts, Board making machine line and Board four-sides cutting machine Line

conditions
The production line is composed of board-making machine,glue-spreading and veneering-drying machine and
glazing machine.according to the production and the automatic degree, this production line is divided into 6
models and three specifications ,such as large ,middle and small specification.The production line for mgo board
has :production workshop ,finished product workshop and raw material warehouse . workshop:100---1000m2,
worker:3---6person,water:ordinary water,electricity:1.1-10KW(according to different scale)

product model




1.Thickness: 2-24mm
2. Width: 600mm-1300mm
3. Length: 2400mm-3000mm
4. Capacity :200 -----2500 sheets per day 8 hours .
5. Configuration :customization

Oxygenic index %
>90
Level combustion
SO
Vertical combustion
SO
Water content rate
10.9%
Capacity
1.15g/cm3
Static bending intentsity
169.46Mpa
Density
T/m3 1.13
Water resistance :Without chalking for 24 hours and there is no change on surface
No "Three-waste" (waste water ,waste gas ,waste residue),no pollution and environmental protection .
Item
Size
Thickness
weight
1
1220*2440mm
3mm
10kg
2
1220*2440mm
4mm
14kg
3
1220*2440mm
6mm
18kg
4
1220*2440mm
8mm
24k
5
1220*2440mm
10mm
28.5kg
6
1220*2440mm
12mm
34kg
Features of mgo board:
1.Strong fireproofing capability
2.Good shockproof capability
3.Smooth and Prevent scratches on the surface
4.Good safety performance
5.Superior performance in sound insulation and heat insulation
6.Damp-proof and non-reaction with halogen
7.Wide applicable scope
8.Bend-proof

application
MgO Board Machine mainly produces all kinds of magnesium oxide boards, they can be used for ceiling, wall skirting, decorating of indoor wall and lining board for furniture.It can replace three-ply board, five-ply board, flakeboard, MDF (Medium Density Fiberboard ) and Gypsum Board.

roof system and floor system
Interior Partition System
mgo skirting board
mgo vent-pipe
mgo flue pipe
Our Service
1)Fully life-cycle value services
Our company provides mgo board production line design ,cost accounting,installation and operation,equipment maintenance and the whole life cycle techincal support.2) complete data specification
Provide production line equipment technical data and instructions,and provide the mgo board production line
formula.3) quality commitment
The company regards product quality as the lives of enterprise,the main components and wearing parts are made
of high quality wear-resistant materials and advanced processing technology,so that the equipment endurable and
wear resisting ,wearing parts warranty for one year.4) Trade service
We can help the customer to do the consignment and the relevant procedure for import and export.

Packing & Delivery
FAQ
Q1.What's your advantage? Why we choose you?
A:1)10 Years experience of test pen production and R&D.We have the most professional techniques and team. More advantage in price
2)Great production capacity Sustainable Supply . According to customer requirements, We support the customized.
3)The project is envoronmental protection.The main raw materials are from gricultural and industrial waste, such as crops straw, sawdust, fly ash, sand and etc. The products are absolutely ecological and low cost.
Q2.What's the Payment?
A:T/T would be better with quick transfer and few bank fees. LC could also be accept, but the procedure is complex
and the fee is high.
Q3.Are you a factory or trading company?
A:We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and
cooperate with us.
Q4.How long is the warranty of your equipment?
A:1 Year.
Q5.Do you supply spare parts?
A:Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q6.Will you provide training?
A:The training is free of charge , and our engineer will be on duty to train your worker.
Q7:How will you provide installation&commissioning?
A:Will provide 2~8persons(adjustable according to the degree of automatic )for installation.