Filter Soldering Air Purifier Hepa Filter Exhaust Arm

Welding fume extraction dust purification extractor arm dust collector
Production introduction
1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals,
precious materials, etc.
2. For the potential of fire and molten slag particles, three protective measures are used inside purifier, to
make it a longer life,more secure and reliable.
3. For the KSJ-0.7B model purifier, its electric control is simple, automatically cleaning relying on
the internal pressure sensors, and also can by manual. There are 3 stages filtering layer with the
interception net. It will also increase the active carbon filter layer according to working conditions or
clients, the filtering effeciency is very high, the active carbon filtering layer will reduce the peculiar smell
in the air.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature,
wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the
model of intelligent.
Features:small dimensionlow pricewood pulp fiber filterfiltering precision is ≥0.5μmSwitzerland switches
Technical Parameters No.ItemParameter1Fan typeCentrifugal fan2Treatment of air flow1300±50 m3/h3Motor power1.1 kW4Power supply220V ~/50Hz5Initial efficiency filter1 pc 1m26Medium efficiency filter1 pc 7m27High efficiency filter1 pc 7m28Total filtration area15 m29Filter mediumSynthetic wood pulp fiber filter paper +membrane10Cleaning methodDischarging the filter to clean11Noise68±5dB(A)12Air pressure1900 Pa13One suction armØ160mm*2m14Weight (excluding suction arm)138±5KG15Dimensions(excluding suction arm)660x750x1200mm