Welding Fume Fume Extractor Dust Collector

Welding dust collector industrial fume extractor with suction arm
Features
1. Fume collectoris configured with one suction arm. The bottom has two directional and two rotary polyurethane
casters withbrake device for easy moving and stationing. It is suitable for the purification of fume and dust
generated in all kinds ofwelding, grinding and other places as well as for collecting rare metal particles and
precious materials.
2. Suction arm can be rotated 360 °, and can flexibly and easily reach the position and angle of sucking by pulling
the handle of the hood and position by itself in the absence of external force. Depending on needs, 2m, 3m or
4m flexible suction arm areavailable. Suction hose uses high temperature-resistant, flame retardant and wear-
resistant composite materials, and willnot crack after burning through by spark and has a longe usage life; the
arm diameter is 160mm.
3. Fume generated in working will be sucked into the purifier through the hood, first through the fire resistance net,
largeparticles and sparks produced in grinding is intercepted and separated; then enter fume directing layer,
i.e. deflector, toramify the fume to avoid residual spark into the main filter cartridge directly; at last the fume
enter the third layer i.e. the mainfilter cartridge, for ultimate purification, and it’s filtration efficiency reach 99.9%.
As the filtering precision of the main filtercartridge reach the indoor emission standards, clean air after filtration
can be directly discharged indoor through the air ventsin the bottom of the purifier.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shut down protection
measures when toohigh temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistantcompounded materials, without crack and damage to sparks. The filter element of the welding fume extractor is producedusing imported PTFE membrance filter material of high filtration precision and can filter out
welding fume of 0.1μm.
Parameters
Model
KSJ-1.5B
Treatment of air flow
1500 m3/h
Motor Power
1.5 Kw
Voltage
380 V/50 Hz
Filtering area
10 m2
Cleaning Methods
Smei-automatic reverse blowing
Compressed Air
0.5~0.6 MPa
Filtration efficiency
0.1μm>99.9%
Noise
≤74±5dB(A)
Weight
154±5Kg