membrane oxygenator

Membrane Oxygenation System
The design of TM Oxygenation System aims at a reliable and consistent performance.
It is used to add oxygen to, and remove carbon dioxide from the blood.
It can be used in two principal modes: To imitate the function of the lungs in cardiopulmonary bypass (CPB), and to oxygenate blood in longer term life support, termed Extracorporeal membrane oxygenation, ECMO.
Priming Volume,surface area and pressure drop have been considered as three important parameters,which must balance against each other.2m2,1.2m2,0.7m2 of membrane area are selected for Adult type.
Pediatric type and infant type giving sufficient oxygen transferring to different ranges of patients,and require low priming volumes.
The integral design allows fast and easy assemblage the operation .
The Parallel positioning of gas exchanger and heat exchanger provides an impact structure and reduces the priming volume effectively.
The 360 degree rotatable inlet panel idealizes the flexibility and convenience during the operation.
Features
1) Adopt excellent Membrane made by MEMBRANA GmbH (Germany).
2) Low priming volume. Menbrane Supplier:
3) Optimized air handling.
4) Flexible for every setup.
5) Drain gage and suction inlet can be rotated 360 degrees, easy and convenient.
6) Crystal shell.
7) MEMBRANA high quality hollow fiber membrane is adopted for heat exchanger, porvides effective temperature variation.
Membrane Oxygenator - Specifications
Specification
Adult
Pediatric
Infant
Max.Blood flow
6 L/min
2.5 L/min
1.5 L/min
Min.operating volume
150ml
150ml
150ml
Priming volume of gas exchange room
160 ml
80 ml
50 ml
Priming volume of heat exchange room
80 ml
50 ml
40 ml
Surface area of Gas exchange membrane
2 m2
1.2 m2
0.7 m2
Surface area of Heat exchange membrane
0.6 m2
0.4 m2
0.2 m2
Recommmeded air and blood ratio
1:1
Venous inlet port
Φ12mm
Φ10mm
Φ6mm
Filtered cardiotomy inlet port
Φ1-10mm
Φ2-8mm
Φ3-6mm
Heat exchanger inlet port
Φ10mm
Oxygenator inlet port
Φ10mm
Φ6mm
Gas inlet port
Φ6mm
Recirculation port
Φ6mm
Water inlet/outlet port
Φ6mm
Order Information - Membrane Oxygenator
Product
Order NO:
Modle
Description
Package
Membrane Oxygenator
MO-L
Adult
Gas exchange area 2m2 ,Max blood flow rate 6000ml/min
2 sets/ box;
MO-M
Pediatric
Gas exchange area 1.2m2 ,Max blood flow rate 2500ml/min
2 sets/ box;
MO-S
Infant
Gas exchange area 0.7m2 ,Max blood flow rate 1500ml/min
2 sets/ box;