Customized tungsten carbide strip blanks from Zhuzhou Jintai

Specification:
1. 100% raw material
2. 14 years experience
3. ISO 9001
4. OEM & ODM
5. Customized products are acceptable
Tungsten Carbide Stripwith Common Grades
Grade
Physical and Mechanical Properties
Recommended Applications
Density g/cm3
Hardness HRA(HV)
TRS
Mpa
YG6X
14.8-15.1
91
1800
It's suitable for drawing steel wire, nonferrous metal wire and rods with diameter less than 6.0mm under low-stress condition.
YG6
14.7-15.1
89.5
1900
it's suitable for drawing steel , nonferrous metal and alloyed rods with diameter less than 20mm under low-stress condition. It is also suitable for drawing tubes with diameter less than 10mm.
YG8
14.6-14.9
89
2000
It's suitable for drawing and adjusting steel, nonferrous metal and alloyed rods and tubes. It's also suitable for making mechanical parts, tools and quick-wear part (such as nozzle, bearing point, guide means, upsetting die and perforating tool)…
YG15
13.9-14.2
86.5
2500
I't is suitable for drawing steel rods and tubes under high compression ratio. It's suitable for the upset forging, perforation presing tools working under high-press condition.
YG20
13.4-13.8
85
2600
It's suitable for making impact dies such as impact watch parts, spring lamination of musical instrument, impact battery case, toothpaste case die. It's suitable for punching dies of small size steel spherr, bolt and screw cap. It's suitable for pressure pad of hot rolling spiral drill.
YG20C
13.4-13.8
82
2600
Suitable for making coldheading dies, cold press dies used in standard part, brearing and tool industries. Also suitable for making punching dies of warhead and cartridge case.
Any Grade will be acceptable as your requirements!2. Type/Dimension/Clear Drawing
3. Available tolerance
4. Order quantity for each type
5. Blanks or finished products
6. If you have any special requirements of the products, pls send us in advance. We will satisfy you as much as we can.Tungsten Carbide Strips
Tungsten Carbide Plates
Tungsten Carbide Rollers
Tungsten Carbide Cutters
Tungsten Carbide Buttons
Tungsten Carbide Tire Studs
Tungsten Carbide Disc Cutters
Tungsten Carbide Drawing Dies
Tungsten Carbide Coal Drilling Bits
Tungsten Carbide Road-digging Teeth
Tungsten Carbide Non-standard MoldsZhuzhou Jintai Cemented Carbide Co., Ltd