Industrial Portable Dust Collector Welding Fume Extractor Mobile Fume Collector

Industrial Portable Dust Collector Welding Fume Extractor Mobile Fume Collector
Features
1. Fume collector is configured with one suction arm. The bottom has two directional and two rotary polyurethane
casters with brake device for easy moving and stationing. It is suitable for the purification of fume and dust
generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and
precious materials.
2. Suction arm can be rotated 360 °, and can flexibly and easily reach the position and angle of sucking by pulling the handle of the hood and position by itself in the absence of external force. Depending on needs, 2m, 3m or
4m flexible suction arm are available. Suction hose uses high temperature-resistant, flame retardant and wear-
resistant composite materials, and will not crack after burning through by spark and has a longe usage life; the
arm diameter is 160mm.
3. Fume generated in working will be sucked into the purifier through the hood, first through the fire resistance net,
large particles and sparks produced in grinding is intercepted and separated; then enter fume directing layer,
i.e. deflector, to ramify the fume to avoid residual spark into the main filter cartridge directly; at last the fume
enter the third layer i.e. the main filter cartridge, for ultimate purification, and it’s filtration efficiency reach 99.9%.
As the filtering precision of the main filter cartridge reach the indoor emission standards, clean air after filtration
can be directly discharged indoor through the air vents in the bottom of the purifier.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shut down protection
measures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage to sparks. The filter element of the welding fumeextractor is produced using imported PTFE membrance filter material of high filtration precision and can filter out
welding fume of 0.1μm.
Parameters Model
KSJ-1.5S2
Treatment of air flow
1800 m3/h
Motor Power
1.5 Kw
Voltage
380 V/50 HZ/3PH
Filtering area
8 m2
Cleaning Methods
Manual handing
Compressed Air
0.5~0.6 MPa
Filtration efficiency
0.1μm>99.9%
Noise
≤74±5dB(A)
Weight
120±5Kg

Company Information